Month: July 2021

What Is The Purpose Of Abrasive Blast Systems?

Abrasive blast systems are a vital part of the construction industry, and can be incredibly useful for you when you are trying to create a smooth surface. There are many different kinds of abrasive blast systems that you can use, and each have their own technique to do and produce slightly different results.

Some abrasive blast systems can be used to roughen up a smooth surface, while others can be used to remove contaminants from a surface and abrasive blasts can also be used to reshape a surface. No matter what your need for an abrasive blast system is, they all work relatively the same way.

How Does An Abrasive Blast System Work?

Abrasive blasting works by pushing a stream of abrasive material at a surface with high pressures to change the texture of a surface. This process is also known as sandblasting, as sand is a very common material used in the abrasive blasting industry. Some fluid, usually compressed air, will push the material out at high speeds and can completely change the way that the surface feels. Depending on the surface, using different styles of abrasive blasting can be the most beneficial and safe. Here are a few of the materials that you can find in an abrasive blast system.

Sandblasting

Sandblasting is the generic term given to abrasive blasting. However, many abrasive blast systems use sand as their abrasive material. The sand is mixed with air and moves through the hose at high pressures to give an even finish to a surface.

Wet Abrasive Blasting and Vapor Abrasive Blasting

abrasive blast

These methods of abrasive blasting are very similar to sandblasting, but implement water. Wet abrasive blast systems completely replace using air as the mover of your abrasive material, and vapor abrasive blasting is done when you add air into your wet abrasive blasting mix. These two kinds of blasting are much weaker than regular sandblasting and can be used on more materials. On top of that, since you are lubricating the surface, cleanup is easier after you finish blasting.

Hydro-Blasting

Hydro-blasting a surface can make the whole process of using an abrasive blaster simple. Since it is just high-pressure water, there won’t be much of a need for cleanup afterwards. This can be used to clean surfaces and reach areas that other methods of cleaning can’t reach. This method is clean for the environment, as water can just flow back into the system if it gets caught, and will cause no damage to plant and animal life, as long as it isn’t pointed at them.

Is Abrasive Blasting Dangerous?

Abrasive blasting can be safe if the proper precautions are taken. If they aren’t then bad things can happen and it can affect the health of not only the users, but also the health of those that come by later on.

Abrasive blasting can leave dust particles in the air, and these particles can be unsafe to breathe. Having a proper cleanup crew come by and clean up after abrasively blasting an area is important and if not done properly, can be cause for concern about the health and safety of the people that need to use that area.

The whole process of abrasive blasting can be dangerous if not handled properly. It is shooting out abrasive materials at very high pressures, and if aimed at a person, could severely hurt them. If you work around abrasive blast systems, make sure that you are taken all of the necessary safety precautions, and wearing the right clothing for the job. If you aren’t prepared, you can severely hurt yourself or others.

Questions To Ask Before Seeing A Chiropractor

If you are planning to visit a chiropractor for the first time, you probably aren’t sure exactly what to expect. This is why it is important that you properly understand what a chiropractor does and how they can help you. You should also come prepared with some questions, so you fully understand what’s going on and ways to prevent the issue from occurring again.

There are many different ways a chiropractor can help you, a great Norwest chiropractor, for example, can help with the typical back pain, but can also help with more unusual problems. Just make sure you are fully aware of the type of assistance you can receive from your local chiropractor, so you know if you can get the right type of help.

Before you head-on into the chiropractor’s office, make sure you have a read on below at some of the most important questions to ask:

Are there free consultations offered?

Some chiropractors will offer the initial consultation for free; this is to help drive more clients to their practice. But is also a good thing for you, especially because you don’t have anything to pay for the first visit. If you have never gone to a chiropractor before, you may not necessarily know what’s wrong.

This is where a free consultation can help, at the chiropractor can sit with you and you can explain the situation and they can offer more guidance into what the issue is exactly, how it is happening, and how to treat the issue. They will provide the course of action they believe needs to be undertaken to help you feel less pain.

What techniques do you use?

Man getting a chiro treatment

Every chiropractor will have a slightly different way of going about things, so it is important that they explain the sort of techniques they use, in a way that you understand what is going on. Once you have a better understanding of the techniques they use and how they are going to treat you, you can make a call on whether you think it is right for you.

It is important to know that one technique is not necessarily better than the other; it is more about what you are comfortable with. While the chiropractor is the professional with the experience, you know your body better than anyone, so if you believe that the treatment plan put forward is the best option, then you should go with that.

What payment plans are available?

If your treatment is only one session or two, then this isn’t really an important question, especially if you have health insurance that covers chiro. But on the other hand, if you have a chronic condition and have to see a chiropractor for many sessions, then it is important to ask about how payment plans/options work.

It is always a good idea to ask about any discount that could potentially be available to you. For example, if you go for a certain amount of sessions, you could get a discount or even something like a family discount, it can’t hurt to ask!

Where can your references or reviews be seen?

Pretty much every chiropractor should have references or reviews, and most of the time they can be found on their website or on third party review sites. But if you can’t find any, then it is certainly a good idea to ask if they have any.

This is a great way to learn more about the chiropractor and what other people think of the service they provide. It is a good idea to not only look at the reviews on their own website, because they are only going to showcase the top ones, but also check other third party review sites for a more balance amount of reviews.